Sentence examples for composites at low from inspiring English sources
Tensile strengths of the composites at low temperatures were also measured by applying monotonically increasing deflection.
Such new materials create high chemical homogeneity of coatings and allow production of dense composites at low sinter temperatures (Aminzare et al. 2013; Andronescu 1993).
Recently, graphene has attracted great research interest and produced superior properties for polymer composites at low filler content.
To achieve the long-term oxidation protection of carbon/carbon composites at low and medium temperatures, a SiC/B4C B2O3 SiO2 Al2O3 coating was applied on the composites.
In this paper, the influence of some factors on the damping property of fiber-reinforced composites at low temperature is discussed.
The dielectric properties of Al2O3/graphene and BaTiO3/graphene composites at low frequencies depend not only on the graphene concentration but also on the grain size and topology of the composites.
Highly conductive CB-doped SU-8 nano-composite at low percolation threshold with good mechanical strength and photopattern ability has been reported for realizing cantilever sensors [198].
In the voltage window, 4.5 1 V versus Li+/Li, 600 mAh g−1 have been recorded for the composite at low current density (0.05 °C rate) with good performances also retained at 1 °C rate (a stable 400 mAh g−1 for 10 cycles).
The results indicate that both ions doping and carbon aerogel coating are effective way to improve the electrochemical performance of the composite at low temperature and high rate for lithium batteries.
The colocation of O and Co, evidenced by the O and Co XRF maps indicates that the Co in the formed composite is in oxidized state and for composites formed at low currents using shorter Co pulses coexistence of both CoO and Co3O4 is evidenced by the Co L3 XAS spectra.
The novel approach is applied to a hollow high performance robotic part demonstrating the following two design potentials: First, binder jetting of water soluble sand material is a suitable technology for the production of very complex composite parts at low tooling costs.
