Sentence examples for composites are only from inspiring English sources

However, mechanical moduli of the annealed SWNT/PS composites are only increased slightly.

X-ray diffraction results reveal that the composites are only composed of BaCeO3-based and SDC phases without any other impurity phases.

Because the Nafion®/PTFE composites are only 31 μm thick, their areal resistance is lower than that of Nafion® 112 membranes: 0.031 vs 0.036 Ω cm2.

No other characteristic peaks of impurity are detected, suggesting that BiPO4/Bi2S3 composites are only composed of BiPO4 and Bi2S3 phases.

However, the SF and GCG resin composites are only light-cured composites and exhibited an adhesive mode of failure; therefore, heat treatment of BG may increase the bond strengths to the Techceram substrate.

In strengthening of RC structures the utilization of externally bonded FRP composites is only up to 35% because of the pilling-off failure mechanism.

The stress strain behavior of the composites is only slightly altered with CNT addition; however, the strain at break is decreased even at low loadings.

The weight loss rate of the double-layer-coated composites was only 0.44% after oxidation for 100 min at 1773 K, while the weight loss rate of inner-layer-coated composites reached 25.35%.

These results indicated that the weight loss of the coated C/C composites was only 0.8% after oxidation in air at 1873 K for 500 h, and the sample was fractured after erosion at 1873 K for 32 h in wind tunnel.

The application of nanoscaled silver or nanosilver composites is only one possibility besides the use of silver salts, silver ion exchangers, silver composites and elemental silver.

Note that the mass content of rGO in the composite is only ∼6%.