Sentence examples for composite if from inspiring English sources

In a monolithic (or single) material, a crack, once started, generally continues to propagate until the material fails; in a composite, if one fibre in an assemblage fails, the crack may not extend to the other fibres, so the damage is limited.

Thin hybrid films (average thickness = 2.78 um) were fabricated by wetting the loose aligned undirectional nanofiber arrays or loose aligned bi-directional nanofiber grids with a gelatin aqueous solution, which also allows for live cell loading into the nanofiber-protein composite if cell are premixed with protein solution or on the surface of the films.

The specific capacitance decreased with the increase in NiOx in the composite if the NiOx percentage was above 8.9 wt%.

In the case of platinum-coated tip, on the other hand, the resistance of the tip Rtip may be neglected, and thus, the tip may be used to quantify the electrical properties of the composite if the tip-sample contact resistance Rtip-CNT is also negligible.

Moreover, root vegetables such as carrots do not grow just in the top 1 in.]; and b soil contact set surface vegetation composite (if available).

Outcome variables were included within the respective outcome-based composite if they had loadings either (a) in excess of.50 or (b) of.30 .49 that were greater than their loadings on ensuing components.

These results indicate that metakaolin-based geopolymer composites, if designed with the correct compatibility between matrix and filler characteristics, can act as an inexpensive castable composite refractory.

These composites, if properly designed, can provide lightweight efficient load bearing structural members that can also absorb high specific energy under impact and crash loading.

Test results can provide valuable information for the material characterization and forming process design of woven composites if researchers know how to interpret the results obtained from varying test methods appropriately.

The present paper will make an attempt to assess the improvement in sliding wear properties attained in a few Aluminium base alloys with different size, quantity and distribution of SiC-particulates and bring out the efficacy of making composites if any in the different alloy systems over other methods of property improvement like homogenisation, secondary processing, etc.

Pure TiO2 and TiO2-G photocatalysts were used in the photocatalytic treatment of a solution containing paracetamol under UV light irradiation and the results are shown in terms of paracetamol degradation and total organic carbon (TOC) removal, evidencing an enhancement of photocatalytic performances due to the presence of G in the composites if compared with pure TiO2.