Sentence examples for composite density from inspiring English sources

Further reduction in composite density is possible with increase of glass bubble size and content.

The effect of composite density and fiber type on the alteration of infiltration rate is discussed.

Furthermore, the use of peat ash increased the composite density in comparison to virgin HDPE.

The incorporation of SiC green tapes between the successive layers of SiC fabrics allowed better control over the composite density and pore distribution.

Results revealed that dye degradation is function of PCF composite density on the effective surface area of the composites.

A 2%wt of nickel powder was added to the composite as well as to reduce the composite density, considering the low density of nickel (approximately 8.9 g/cm3), in comparison with the composite (approximately 17.22 g/cm3).

Nonetheless structures obtained via topology optimization are composed of parts of composite densities which can not produced via additive manufacturing.

This can be obtained at the end of computational optimization through a penalization step which gives the composite densities from 0 to 1 the values 0 or 1.

For the maximum pressure difference (only 0.25 MPa) up to 90% of the open porosity could be filled, but since the ceramic foams were found to contain closed pores, the resulting composite densities were low.

The results indicated that both FAC and GMS38 were suitable for producing structural lightweight composites (density less than 1920 kg/m3 and minimum compressive strength of 17 MPa (ACI 213 2003)).

Various relationships are derived for simulation of random processes with simple or composite probability density functions.