Sentence examples for components of stiffness from inspiring English sources

Each node has six degrees of freedom and the components of stiffness at each node are initially set to sufficiently large values to provide rigid response in the pre-collapse stage.

The components of stiffness and mass matrices were calculated using numerical integration of Gauss-Legendre.

This equation consists of two sets of equations corresponding to the two buildings, while these two sets of equations are coupled by the off-diagonal SSSI components of stiffness and damping matrices.

The heat capacity c, coefficients of thermal expansion α ij, components of stiffness tensor C ijkl are assumed to be constant, otherwise the above material equations are not valid, for a thermodynamical derivation of all aforementioned constitutive equations, see (Abali 2016, Sect. 3.3).

Previous research has suggested that the viscous component of stiffness is more difficult to judge.

Under slow sine sweep excitation, the frequency response function for the structures was observed to show features similar to a system with a cubic component of stiffness, and the modal properties of the structures were extracted using the equation of motion of such a system.

No significant difference was found in the Kxx-component of stiffness, however a significant difference was found in the Kyy-component of endpoint stiffness between the vision and no vision conditions.

The damaged stiffness matrix C(D) can be expressed in a matrix form by using the components of undamaged stiffness matrix and the principal values of the damage tensor D I according to the Murakami-Ohno damage model (Murakami, 1988).

The stiffness constants exhibit certain characteristics associated with auxetics such as the negativity of non-diagonal components of the stiffness tensor.

It is demonstrated that the existing procedure results in large approximation errors in several components of the stiffness contribution tensors of the considered fibers.

Influence of fiber length on contribution of the surface effects to the effective properties of the material containing cylindrical cavities has been analyzed for all five independent components of its stiffness tensor, and for two sets of surface properties in the Gurtin-Murdoch model.