Sentence examples for components are positioned from inspiring English sources

In other words, the more correlated, the nearer the components are positioned on the map [ 11, 22].

In contrast to mechanical alignment, in kinematically aligned TKA the femoral and tibial components are positioned so that the angles and the levels of the distal and posterior femoral joint line and the tibial joint line are each restored to the patient's natural alignment (Howell et al. 2013a), which is not necessarily mechanically neutral (Eckhoff et al. 2005).

Majority of the seed yield and components were positioned in the middle and upper part of the plant.

The ion dump modules consist of the full, half, and third energy components is positioned on one side of the bending magnet.

The trial components were positioned, and dynamic tests were performed to choose the polyethylene thickness.

On preoperative AP radiographs and computed tomography scans, the acetabular components were positioned in the true acetabulum.

The components were positioned in the friction rig to allow either a "worn" area or an "unworn" area to be tested.

From the separation differences apparent when different CKC components were compared (Table  2), the CKC components were positioned along the centromere-spindle axis as indicated by the vertical colored lines in Fig.  7e.

3 studies (Adalberth et al. 2000, Gioe and Bowman 2000, Norgren et al. 2004, Gioe et al. 2007a) found no significant difference between the groups, whereas Adalberth et al. (2001) found that the AP components were positioned with a slightly more posterior tilt as compared to the MB components.

In Group A and Group B, the tibial components were positioned in the coronal plane at an average α angle of 89.1 degrees (range, 81.5 to 94.7 degrees) and 89.2 degrees (range, 84.1 to 95.4 degrees), respectively, and in the sagittal plane at an average β angle of 85.2 degrees (range, 81.3 to 94.1 degrees) and 85.4 degrees (range, 79.9 to 92.6 degrees), respectively.

Geometry for multi-panel detectors is defined using a multi-level hierarchical approach as shown in Fig. 5; each component is positioned with parameters defining its rotation and translation in the parent frame.