Sentence examples for component strengths from inspiring English sources

Operational reliability was sought by avoiding corrosion, reducing mechanical wear and tear, increasing component strengths, and reducing the number of interfaces.

The analysis shows no interaction of the component strengths, with the frictional strength proportional to and the adhesive strength independent of the clamping force as if the underlying mechanisms were acting separately.

A sensitivity-normalized estimate of the local current dipole power (sum of squared dipole component strengths) at each source location was calculated [27], [38].

No a priori assumptions were made regarding the local dipole orientation, so the local current dipole power equals the sum of squared dipole component strengths.

In this paper the formulation of the limit state for reinforcement tensile rupture is developed and the component strength-reduction bias statistics identified.

Uncertainties in structural component strength, stiffness, deformation capacity, and cyclic deterioration are considered for non-ductile and ductile frame structures of varying heights.

Concerning monotonic tests, stapled connections behavior oriented at 90° and nailed ones is similar; also the component strength is impacted by the orientation of the staples.

A compositional grading of PEEK and PTFE is implemented in this study to create a bulk composite with the functional requirements of component strength, stiffness and wear resistance while providing solid lubrication at the sliding interface.

While the influence of the component strength on masonry is relatively well studied, few studies have been devoted to its influence on masonry properties mainly because of the difficulty of varying the masonry typology systematically.

Significant effects of the statistical parameters on the failure behavior and ultimate component strength were observed, manifesting importance of accurate definitions of the statistical properties for predicting probabilistic failure behavior and damage tolerance of laminate composites.

This increase in component strength reflects an increase in the BOLD signal variability that can be attributed to a particular component.