Sentence examples for component coating from inspiring English sources

The procedure requires residual stress and hardness measurements in the surface layers of material of a coated component (coating and bulk) to develop numerical axisymmetric and three-dimensional finite element models capable of predicting the fatigue life.

Multi-phase and multi component coating development is one of the present research trends in surface engineering arena.

The 3-component auxetic yarn is based on a stiff wrap fibre (the first component) helically wound around an elastomeric core fibre (the second component) coated by a sheath (the third component).

The MoSi2-CrSi2-Si/SiC multi-component coating was prepared by two-step pack cementation on carbon/carbon composites.

To solve this problem, SiC/La2Zr2O7 multi-component coating has been prepared on the C/SiC composites surface by combining sol-gel process and slurry.

The thermal conductivity of the C/SiC composites decreased by 12%to28%8% after deposition of SiC/La2Zr2O7 multi-component coating.

Microhardness test indicated that the Ir Re Cr N multi-component coating exhibited compatible hardness with the Ir Re binary hard films, and the surface hardness was better than that of the Ir Pt film.

The as-prepared SiC/La2Zr2O7 multi-component coating was well bonded to the substrate, which might be associated with the newly formed La4.67(SiO4)3O phase, with a uniform thickness of 85.8 μm.

In the present study it was attempted to develop a multi-component coating by laser cladding process using a pre-placed powder mixture containing Ni5Al (50 vol%) + hBN (10 vol%) + B4C (20 vol%) + SiC (20 vol%) on substrate of Ti-6Al-4V to improve its tribological performance.

This case study points out the possible participation of other components (coating materials), beyond MMVFs, in the etiology of pneumoconiosis.

Combined with data in Figure 5 a, the TRPS traces reflect the dynamic nature of the dispersion; SWCNH-ox in 1% FBS appear to be poorly stabilized due to insufficient serum in the media, resulting in a mix of particles with variable amounts of serum components coating their surfaces and potentially indicating partial coverage.