It is observed that the residual magnetic torque does not have component along the spin axis.
The force component along the x axis was measured and the bead displacement along the x axis was calculated knowing the trap stiffness (0.27 pN nm−1).
The locking is explained by the non-planar splitting of the screw component along the three-fold line directions.
Magnetometers measuring the field component along the chip surface have a flux density resolution of about 10 nT/√Hz at a coil current of 100 μA.
If the torque component along the intermediate axis is negative, a recovery from a pure flat spin can be established for any torque magnitude.
In a few instances, for the very strong cross-peaks, we observed a minor conformation that corresponds to the non-TROSY component along the 13C dimension; this is marked by a red solid rectangle.
The resultant force component along the apex-to-base direction can by definition only act on the effective area orthogonal to the direction of the force, regardless of the three-dimensional geometry of the anatomy.
By analyzing the changes recorded for each Gaussian component along the dehydration process of the films at different pH values, a band assignment was proposed.
The results show that during torsion, the tensile stress component along the tube axis is most significant and other stress components are almost negligible.
The results for magnetically oriented SmA1 LCs show that the thermal diffusivity component along the LC director direction is larger than that perpendicular to the director direction.
It was found that the horn length is proportional to the composition vector component along the major eigenvector of the effective diffusivity matrix.
