Sentence examples for compliance normalized from inspiring English sources

Within the process of team building, the conflict scale significantly decresed and in parallel compliance normalized as well.

Correlation between normalized compliance scores and percentage of goal achieved was high for both bionator (r = 0.50) and headgear subjects (r = 0.49) at the end of treatment.

Here j is the compliance (bead displacement normalized by force), t0 = 1 s and A and α are fitting parameters [30], [31].

For determination of crack opening load, a modified ASTM compliance offset method called the normalized ASTM offset method is proposed, which utilizes the relative compliance offset normalized by the maximum offset obtained by the ASTM offset method.

The average normalized strains and the compliance for the same sample exhibited a strong linear relationship.

Finite element analysis was employed to show that the specimen compliance has a one-to-one correspondence with the Normalized Area (NA) or Normalized Harmonic Mean Radius (NHMR) independent of crack depth and crack aspect ratio and with the crack shape and specimen dimension for a range of crack and specimen dimensions.

Reasons for this underuse typically include concerns over increased risk of bleeding as well as limitations in healthcare access, facility availability, physician awareness, the inconvenience of monitoring international normalized ratio (INR) levels, and patient compliance [ 8, 9].

It was found that the 4% compliance offset criterion in the conventional ASTM procedure and the 10% offset criterion in the normalized ASTM procedure were suitable for determination of the crack opening force of high strength steel weldments.

This variation is found to be strongly correlated to either stiffening or increased compliance of the tangential stiffness due to the influence of nonlinear elasticity, which leads to normalized critical forces that decrease with decreasing aspect ratio for the 〈1 0 0〉/{1 0 0} and 〈1 0 0〉/{1 1 0} systems, but increase with decreasing aspect ratio for the 〈1 1 0〉/{1 1 0}{1 0 0} system.

From the linear portion of the curves the compliance (C) due to all specimens is individually calculated and the compliance is plotted against the normalized crack length, i.e., a/W.

The changes in average normalized strains developed in the constructs from UEI compared well with the changes of mean compliance from compression tests and histology.