Consequently, the overlapped junction in ZGNR has a lower electrical transport comparing to that of an ideal (non-overlapped) ZGNR.
This program could also be implemented in HPS side only so that the speed difference could be demonstrated when comparing to that running with FPGA and HPS.
The Gd-TTDA-NP-BN shows remarkable high relaxivity (7.12 mM−1 s−1) comparing to that of [Gd TTDA-NP)(H2O)]2-.
The removal efficiencies of U VI) increased remarkably in the presence of voltage for both ACF and graphite, comparing to that in the absence of voltage.
The AgNWs window layer significantly improved transmittance for broad wavelengths, comparing to that of the conventional indium-tin-oxide (ITO) film structure.
Then, the bioavailability was evaluated by orally administering the mPEG-DXM conjugate in rabbits and comparing to that obtained by the intravenous route.
This study aims to manufacture and evaluate a highly-pure synthetic crystalline calcite with good cytocompatibility regarding to the osteoblasts, comparing to that of HA and β-TCP.
Load-induced structural tension/compression stress and stress-induced damage were qualitatively evaluated through analyzing the characters of electromechanical admittance (EMA) signatures and comparing to that of the non-stressed PZT transducer.
The TI-CQDSCs are constructed on both nonconductive glass and flexible substrates, and a maximum power conversion efficiency of 6.4%and5.6%6% is achieved, respectively, comparing to that of 5.9% for the C-CQDSC.
Moreover, the better distribution of irregularity peaks and pits under the MQCL method, comparing to that obtained after dry cutting implies that surfaces machined with the use of MQCL technique can be characterized by a high wear resistance.
In addition, higher power density and lower interfacial resistance were obtained for cells with the Fe0.25Co0.25Ni0.5 SDC anodes comparing to that with Ni SDC anodes, which have been usually used for LT SOFCs.
