Sentence examples for compared to the operating from inspiring English sources

Because of the low consumption of cleaning chemicals, low differential pressure and no need for media filtration the operating costs for Multibore UF membranes would be remarkably lower compared to the operating costs of the existing arrangement at Addur.

The effluent quality controllers alone and the cost control together with effluent quality controllers could save up to 42,000 Euros/year and 225,000 Euros/year, respectively, when compared to the operating costs of the plant operating with DO control (a reduction of 2.5% and 13% of the operating costs, respectively).

The non-operated leg, that served as indicator for systemic response, was compared to the operated leg and significant difference were also present at the individual measurement points.

The lever arm was then measured in the contralateral hip and compared to the operated side.

Finally, a sensitivity analysis on the optimization results was performed for some of the key parameters, revealing the fact that operating pressure of the system has the highest impact on the exergetic efficiency compared to the other operating parameters.

But developers dismissed it as underpowered compared to the native operating systems.

The challenge is to design a prosthetic valve that maximizes the benefits offered to the recipient as compared to the normally operating naturally-occurring valve.

Compared to the conventional operating modes, the proposed method also presents advantages in transfer reliability and robustness to delay and demand variation.

The check experiment revealed that the amount of COD and color in the effluent could be decreased by 9.97% and 10.12% compared to the usual operating conditions, respectively.

Application of the proposed method to a real urban drainage system showed a high efficiency in terms of flood mitigation and performance of pumps compared to the current operating rule for the pump station.

This chapter also discusses the theoretical studies establishing the reduction in bearing life under the influence of different levels of shaft voltages before initiation of craters on the bearing surfaces as compared to the bearings operating without the influence of shaft voltages.