Sentence examples for compared to the failed from inspiring English sources

But compared to the failed countries that I have worked in, I continue to believe in and admire my country, that all our states are still strongly held together.

In the present study, when compared to the failed implants, the higher ISQ values were found in the successful implants, and when all successful implants were considered the ISQ values slightly decreased following implant placement and then increased up to 1-year.

From the shape of the load deflection curves of the PSFC I-Beams, shown in Fig. 11, it can be seen that the beams which failed in web-shear mode (R1 R4) demonstrated higher shear capacities compared to the beams that failed in flexural-shear mode (R5 and R6).

There was a difference, however, in the number of hours per week the groups spent training, with the trainees who qualified spending twice as many hours per week training compared to the group who failed to qualify [t 57) = 6.62; p = 0.001].

It was observed that fasteners with the incremental failure mechanism were able to more effectively distribute the load such that the effects of missing nails are reduced compared to the panels which fail by the sudden mechanism.

With the 8-kHz measurements, the proposed OC-based TDE method gives better and more consistent location estimates as compared to the CC which fails (location failure (LF)) several number of times to locate the source in an acceptable region (4×4 m). Figure 12 shows that CC fails2 more than 50% of the times, while the failure rate of OC is less than 30%.

We observed that the average amount of DNA isolated (295 ng) was lower in the group (n = 15) where two or more assays failed [as compared to the group without failing assays (n = 102, 2973 ng)].

After all, when you launch a Kickstarter project, the odds are against you; 56percentt of Kickstarter projects fail to find funding — with some 32K projects in total having failed, compared to the 25K projects that succeeded.

The effects of psychotherapies compared to the waiting list control condition failed to remain significant after adjusting for non-specific factors.

Also, upon exposure to thermal shock, the stress strain response displayed a non-linear behavior prior to failure as compared to the pristine C/C composite that failed in a brittle manner.

It is observed from the results that 1.5 wt% C15A/UHMWPE nanocomposite coating did not fail even until ∼100,000 cycles (sliding distance = 1.3 km) at a normal load of 9 N and a linear sliding speed of 0.1 m/s as compared to the pristine UHMWPE coating which failed early under same conditions.