Sentence examples for combustion velocity from inspiring English sources
The experimental results show that increasing the initial pressure will reduce the laminar combustion velocity of the flame, while increasing the initial temperature will increase the laminar combustion velocity of the flame.
With the increase of hydrogen ratio, the laminar combustion velocity of flame and instability of flame increases.
In this paper, the laminar combustion velocity of low calorific value gases blended with hydrogen was experimentally studied in the constant volume combustion bomb.
The impact of the fuel composition on the combustion velocity and knock occurrence is studied for three compression ratios (9.5, 11.5 and 13).
Results of closed vessel combustion tests show that the RDX@Fe2O3 Al combustion velocity accelerates to an average pressurization rate of 2.527 MPa/μs.
With this goal, process temperature, combustion velocity, reaction rates and product composition were studied experimentally using direct thermocouple measurements, video recording, TGA and XRD analysis.
Based on the assumption that shock-free internal burning is possible in a supersonic airstream, calculations are made for the performance of ramjets using supersonic combustion velocities.
The high combustion velocities of nanothermite loose powders (0.1 2.5 km/s) arise from the propagation of heat through their porosity by the advection of hot gases and particles.
This is due to the maximum combustion velocities that are reached in fuel-rich conditions.
The results show that the fluorinated agents possess sufficient energy to participate in combustion processes, and can support combustion with burning velocities which should be measurable (for some of the systems) at slightly elevated initial temperatures.
The DPVCARS measurements provide an experimental database including temperature and turbulent burning velocity for combustion model evaluation and validation and demonstrated a strong potential for flame structure investigation with future improvement on spatial resolution and signal to noise ratio.
