Sentence examples for combustion is achieved from inspiring English sources

The results show that a transient combustion period exists before steady combustion is achieved.

Power for running a stoker is usually furnished by an electric motor, and control of combustion is achieved by variable speed or intermittent drive.

Diesel-like compression ignition combustion is achieved by injecting the oxygen and the hydrogen in the surrounding steam close to a continuously operated glow plug.

The results indicate that, stable combustion is achieved by a compatible burner design in both air-fired and oxy-fuel combustion.

Since the recirculation zone anchored in the cavity is not exposed to the main incoming flow, stable combustion is achieved, even in the presence of a high speed main flow as typically expected in Ramjets and Scramjets.

Experimental results indicated that complete combustion is achieved when the equivalence ratio is above the known lean flammability limit (ϕ = 0.53) at high discharge repetition rates of 50 kHz.

While full combustion was achieved burning syngas, showing the feasibility of the use of this material considering the ex-situ gasification process.

With PG heating value of about 5 MJ/m3, lean to ultra lean stable combustion was achieved with equivalence ratios in the range of 0.33 < Φ < 0.71.

A self-sustained combustion was achieved with a mixture of 4% methane at around 500°C with a complete conversion of methane and a zero emission of NOx and CO.

Spontaneous combustion was achieved with the powder, which had been originally milled in the 1930s and improperly stored in a barge at the Navy's Yorktown, Virginia Naval Weapons Station during a 1988 dry-docking of Iowa.

In all cases where supersonic combustions were achieved, ignitions were firstly observed in the boundary layer at the expanding cross section zone.