Sentence examples for column surface from inspiring English sources

Then the column surface was prepared for installation of the CFRP system.

Points B and D are located at a distance of 191 mm (slab thickness) from the column surface.

spark discharge, formation of ionization column, vaporization, localized neck formation, plastic deformation, mass transport via ionization column (surface and volume diffusion), and solidification.

Putty was used to fill the voids on the column surface, while primer was use to facilitate the bond between the concrete and the CFRP system.

When such cues are found in the image, the corresponding 2D column surface pixels could be mapped to the 3D points in the cloud.

Steel jackets around the reinforced concrete (RC) columns are usually made by means of steel plates covering all over the column surface area.

A photogrammetry method was applied using a reference grid on the top and bottom column surfaces to record and analyze deformations in the plastic hinging regions.

In the case of specimen J-CFRP (Fig. 4), before wrapping the CFRPs, the surfaces of the two column sides were carefully cleaned to coat an epoxy adhesive layer along the column length of 1100 mm to ensure the bonding between the CFRPs and the column surfaces.

This assumption is consistent with the conditions of etching of the porous matrix: dissolution occurs starting from the surface of the SiOx nanocolumns; first, the side surface of nc-Si is dissolved, since it is closer to the column surfaces, which leads to elongation of nanoparticles along the axis of the column.

(Neto et al. 2002) used color values to recognize structural elements in digital images, while (Brilakis et al. 2006) presented the concept of "material signatures" to retrieve construction materials, such as concrete, steel, wood, etc. (Zhu and Brilakis 2010) combined two recogniton cues (shape and material) to locate concrete column surfaces.

To precise the impact of sand implementation on hydraulic and biological behaviors, a study has been done in laboratory columns (surface 0.1m2) in relation to physical and mechanical characteristics of the sand.