Sentence examples for cold hardness from inspiring English sources

You feel the cold hardness of your new manacles, and the hardness of the back seat of the police cruiser, which is made of plastic.

Previously we reported the different expression patterns of WRKYs in V. amurensis, a cold-hardness species.

To understand the deposition mechanism, the deposition behaviors of single WC-Co spray particles impacting on the substrates with different hardness during cold spraying were examined using WC-12Co powders with different porosities.

Finally, the measured hardness during cold rolling was found to decrease initially within the low deformation regime and then increase at higher deformations with a minimum at a strain of ∼0.073.

Table 1 List of experiments conducted to evaluate F500W and E500 steel plates Base metal Welded joints Chemical composition Chemical composition Microstructural analysis Mechanical properties Mechanical properties Hardness measurement Cold-resistant tests: Charpy V-notch impact test NDT test Tkb test CTOD test Cold-resistant tests: Charpy V-notch impact test CTOD test.

The joints were evaluated using optical microscope and scanning electron microscope, and a mechanical experiment was conducted, involving micro-hardness test, cold helium leak test and hydraulic pressure test.

Surprisingly, the steady-state grain size obtained by cold-rolling is marginally larger than the grain size after HPT, which agrees well with the 10% lower steady-state hardness after cold-rolling.

You are not hard for hardness's sake.

Hardness of a cold formed part increases due to plastic deformation induced during the forming process.

Corroborative evidence for the recovery processes was obtained by differential scanning calorimetry and hardness measurements of cold rolled and annealed samples.

Despite this, the 10% lower steady-state hardness value after cold-rolling is not satisfactorily explained above.