Sentence examples for coefficient of static friction from inspiring English sources

There is no evident relation between the load and the coefficient of static friction.

A solid lubricant at operating temperature was found to reduce the coefficient of static friction.

The films display a constant coefficient of static friction even after many single measurements.

The coefficient of static friction on rubber, plywood and galvanized sheet of plum cultivars were 0.194, 0.187 and 0.164, respectively.

The coefficient of static friction increased linearly against all the tested surfaces as the moisture content increased.

Film properties such as apparent work of adhesion and coefficient of static friction are obtained from coated micromachine test structures.

It occurred to her that students would be more interested in, say, the difference between the coefficients of static friction and kinetic friction if the kinetic example involved tires skidding on a turn at Daytona.

The coefficients of static friction, on galvanized iron steel, plywood and rubber surfaces, varied from 0.243 to 0.219, 0.261 to 0.232, and 0.296 to 0.268, respectively.

The mean coefficients of static friction increased significantly from 0.36 to 0.38, 0.33 to 0.35 and 0.42 to 0.45 on steel, galvanized iron, and plywood, respectively.

Friction coefficients (static friction coefficient (SFC) and dynamic friction coefficient (DFC)) of pomegranate seed on different structural surfaces (glass, aluminum, plywood, galvanized steel and rubber) as affected by moisture content (4 21.9% (d. b).) and sliding velocity (1.4 16 (cm/s)) were investigated.

The effective friction coefficient depends on static friction, hydrostatic pressure, and pore fluid pressure; a value of μ′ = 0.4, consistent with laboratory evidences on friction and moderate pore pressure when fluids are not fully expelled, is often assumed [ Stein et al., 1992 , 1997.