Sentence examples for coating which can be from inspiring English sources

Two dissimilar wires can produce an intimately mixed coating which can be sprayed.

It is assumed that this is caused by depletion of this substance in the outermost layers of the coating which can be caused by degradation and evaporation.

If spin coating was used, the biosensor responses were quicker than in the case of drop coating, which can be explained by a thinner layer of zeolite and a smaller amount of enzyme in the first case.

The SIMS depth profiles of glass M1 show alkali and alkali earth ions in the coating, which can be the reason for the formation of crystals on the surface of the coating.

Results show that hybrid coating containing 5% EHBPE shows considerable enhancement in corrosion resistances compared with the neat DGEBA coating, which can be explained by the higher crosslink density, less structural defects, and possible fewer free volume.

They have created an antimicrobial polymer coating which can be switched between a state in which it kills bacteria - eliminating 99.9% of sprayed-on E. coli - and one where it shrugs off the dead cells and resists the attachment of new ones.

In conclusion, this original work offers a low-cost and environment-friendly method to prepare a high active electrocatalyst with cheaper price, and this work also discloses the correlation between surface structures and ORR catalytic activity for the hollow structures with Pt skin coat, which can be instructive for designing novel advanced electrocatalysts for fuel cells.

If you are going to a colder climate, consider bringing a single coat to wear over layers, rather than several coats, which can be cumbersome and heavy.

Such an approach will yield results independent of both the substrate powder and the coating device, which can be applied widely to select suitable coating materials and methods of application.

This study concluded with a definition of a critical "coating parameter" which can be used to assess safe combinations of coating thickness and installation loads, thus preventing excessive strain concentration.

Small-scale impact testing allows for rapid and inexpensive investigation of attractive thin coating designs, which can be performed over a range of controlled temperatures.