Sentence examples for coating starts from inspiring English sources

At t = 1200 s the titanium coating starts again.

In contrast, the carbon-free TiAlN/VN multilayer coating starts oxidising rapidly at 638 °C.

When the coating starts cracking during the elastic loading of the substrate, the formed cracks function as nucleation points for the shear bands.

After TiO2 particles have reached their final primary particle size (e.g. upon completion of sintering during their flame synthesis), coating starts by uniformly mixing them with HMDSO vapor that is oxidized either in the gas phase or on the particles' surface resulting in SiO2 aerosols or deposits, respectively.

The conventional silane, n-decyltriethoxysilane, and the pendant dipodal, 1,2-bis trimethoxysilyl decane contact angles follow each other very closely up to day 28, after which the conventional silane coating starts to significantly degrade.

The results showed that molten Zn penetrated TiCP/Ni coatings via the cracks that were present within as-coated TiCP/Ni coating, starting from the first weld.

However, at 600 °C and 300 N, the oxidation/diffusion coating started to present a failure tendency.

Every coating started with an AlTiN base coating, followed by a hybrid coating and a HiPIMS top coating.

Results show that the freezing process of the continuously sprayed droplets on the superhydrophobic coating started with the homogeneous nucleation at gas liquid interfaces.

When H2 was introduced during deposition, PyC coating started to form at 900 °C, and the deposition rate increased rapidly with increasing temperature.

You should see the sugar coating start to dissolve fairly quickly; the marshmallow center will take longer, though.