Sentence examples for coating specimens from inspiring English sources

The properties derived for the coatings were categorized according to the position of the coating specimens with respect to the central axis of the target.

Nanostructured CoNiCrAlY coating specimens, prepared from cryomilled powder, were deposited using HVOF thermal spraying.

The coating specimens were characterized by scanning electron microscopy and X-ray diffractometry.

The accelerated test was designed based on the Arrhenius model, and the changes in surface roughness were measured to determine the failure of the coating specimens.

Thin and bulky freestanding coating specimens (FSCS) were tested and compared in order to evaluate the mechanical strength and ductility of this material.

As-deposited and post-deposition treated coating specimens were subjected to electrochemical measurements in 3.5% NaCl aqueous solution.

Afterwards, loss of protective behavior of coating layer occurred only by iron oxide nodules formed on the coating specimen exposed at 850 °C for 24 h.

Based on the parallel experiments of cyclohexane pyrolysis for each TiO2 coating specimen, it is indicated that the best performance was achieved on TiO2 coating deposited at 250 °C for 80 min with an anti-coking ratio of 64.0%.

AFM examination of the composite coating specimen indicated that root mean square roughness (RMS) of the nano-HA/MgF2 and DCPD/MgF2 composite coatings was approximately 395 nm and 468 nm respectively.

Chenopod domestication in the East dates to at least 4500 bp, when thin-seed-coat specimens appear at the Cloudsplitter and Newt Kash rock shelters in Kentucky.

TiCN-coated specimens presented neither cytotoxicity nor genotoxicity.