Sentence examples for coating side from inspiring English sources

The wear of the counter material has increased in these coatings without the occurrence of any wear damage on the coating side.

From the response table, the largest value of the GRG is achieved for the type of coating of Super-Z lloy, coating thickness of 300 μm, the bond coating thickness of 75 μm and temperature on coating side of 1000 °C for thermal characteristics of TBC coatings for high-temperature applications.

The control factors considered were the type of coating powder (A), the temperature on coating side (T), coating thickness (C) and bond coat thickness (B).

The results of the verification test were 265 °C for TD (temperature fall from coating side to substrate side) and TFC of 466 (number of cycles withstood).

A4-T3-C4-B2 A4-T3-C4-B2 A4-T3-C4-B2 A4-T3-C4-B2 A4-T3-C4-B2per-Z alloy, the temperature on combinatione of 1000 °C, Coatindicatesness of 300 μm and bond coathehickness of 75 μm.

The contribution of type of coatings of Super-Z alloy is quite large 72.98 % in comparison to the other set of control factors (coating thickness, bond coat thickness and temperature on coating side) of TBCs used in the aerospace industry.

Coated side consisting of TiO2 or WO3/TiO2 of the electrodes was illuminated with UV light radiation, and obtained potentiodynamic behavior is shown in Figure 2.

Place lamb in bowl, turn to coat sides, and cover by placing sheet of plastic wrap directly on meat.

They did work with papery white cotton and delicately pleated georgette for airy coats, side-draped trousers and a cool halter tunic in two shades of white.

Furthermore, the location of Kirkendall porosity formation shifts, depending on the spraying process used, from the substrate-side of the interface (LPPS) to the coating-side of the interface (HVOF).

Aggression tests took place in a plastic Petri dish arena (100 mm×15 mm) with Fluon-coated sides and a filter paper floor (replaced between trials).