Sentence examples for coating section from inspiring English sources

It is found that the evolution of the profile of bridge (including the hydrate coating section and the pure liquid section) can be predicted with a satisfactory accuracy.

Chang et al. (75) have developed a semiempirical model assuming that the formaldehyde in the applied paint is distributed in a top layer (thin surface-coating section) and a bottom layer (paint embedded in the substrate).

Dip the swap into the oil, then coat sections at a time of the back of the drawing.

This paper reports the results of a study addressing the surface morphology, surface roughness, coating cross section, chemical composition, crystal structure, microhardness, adhesion, and the wear life of this cBN-based coating deposited on carbide inserts (SNMG432) for finish turning of hardened AISI 4340 steel bars.

After partial delamination of the zinc coating, cross sections of zinc coated steel were prepared to determine the location and extent of the interface cracking and the crystallographic orientation of the delaminated zinc grains.

The coating cross-section has shown bands of varying contrast.

Microstructures of coating cross sections exhibit features such as cracks and porosity.

The local hardness measured on a coating cross-section increased with increasing Si content.

The design of the micro-channel system provides a simple way of coating separate sections of a cantilever array with different probe molecules.

The coating cross-sections and surface morphologies were investigated using Scanning Electron Microscopy (SEM), and the chemical compositions were analysed using Energy Dispersive X-ray (EDX) spectrometry.

For each sample, the voltage time response of the PEO process was obtained and compared with surface morphology, and coating cross sections and thicknesses.