Sentence examples for coating of the system from inspiring English sources

This difference may be caused by the addition of S and/or W in the coating of the system with the DB.

To study this possibility, the model was extended to allow debonding of the nodes in the top and bond coat of the system after cooling down.

The base coating of the coating system is a gloss lacquer with a Cr reflection layer.

The fracture modes in the top coat and between the top coat and the bond coat of the TBC system are dependent on the bond coat nature, including the accumulation of damage and its development at high loads of 1000 and 1500 N.

In order to assess the influence of the coating thickness on the system properties, indentations were made to peak loads between 5 and 500 mN, creating displacements which either exceed, are of the same order of, or are less than the coating thickness.

In this investigation three characteristic lengths are accounted for, due to the scale of the system: coating thickness, probe tip roundness, and spatial gradient of mechanical properties.

The HT-BD7200 is dressed in Samsung's latest ToCTM treatment, providing a luxurious charcoal grey coating to the black bezel of the system.

It was shown by Yu et al. [10] that coating the SiO2 surface with carbon could be an efficient method to enhance its electrochemical performance, because such coating not only improves conductivity of the system but also accommodates the volume changes of the active material upon cycling.

All wavefront RMS values were evaluated in terms of the shortest wavelength consistent with the coating of the reflective optical elements in the system (450 nm).

In the present study Ti5Si3/Si layers synthesized by compression plasma flows treatment (treatment time ~ 100 μs) of the system "titanium coating (1 μm) – silicon substrate" are studied.

It gives a good choice as the bond coating of a TBC system.