Sentence examples for coating of the electrode from inspiring English sources

It has been shown that reduction of TeCl4, or TeCl−26 to Te causes coating of the electrode with metallic tellurium, on whose surface chloride ions are strongly bonded.

As the weld is laid, the flux coating of the electrode disintegrates, giving off vapors that serve as a shielding gas and providing a layer of slag, both of which protect the weld area from atmospheric contamination.

To test selectivity of the electrodes, a lack of response to sodium nitrite of up to 10 μM was regarded as evidence for an intact coating of the electrode.

Recently, we have explored PANI coating on the electrode of the quartz crystal microbalance as chlorinated hydrocarbon and alcohol vapor[34, 35, 36] sensors.

The effect of abrasion on the coating of the electrodes was determined by performing weight change analysis.

The rGO coating apparently improved the cycleability of the CoNi2S4 electrode without sacrificing total capacitance, therefore resulted in efficient and long lifetime energy storage device.

The W coating of the Si electrode was conducted using the PVD method (Fig. 1) at Dongwoo Surface Tech Co. , Ltd

This work showcases the flexibility of the copper-based sensor design, which can be easily modified by simple coating of the working electrode.

In the case of some of the longer ZnO nanorods, the BHJ blend tends to coat the nanorods without filling the voids, which requires a space-filling PEDOT PSS layer or conformal coating of the metal electrode.[ 23, 25] In our CuSCN devices, we do not see any conclusive evidence of either nanorod protrusion, excessive capping layer, or failure of the BHJ blend to penetrate the scaffold.

Barium oxide is used in a coating for the electrodes of fluorescent lamps, which facilitates the release of electrons.

Insert the "clean end" (the end without the powder flux coating) of your electrode into the electrode holder.