Sentence examples for coating of polymer from inspiring English sources

"Right now we just have a flat coating of polymer," he says.

Spray coating of polymer latex onto fertilizer particles in a fluidized bed for producing controlled-release urea is an environment friendly technology as it does not need any toxic organic solvent.

To do that, the active carbon particles prior to the polymer coating were modified with an acid for individual separation without agglomeration between particles, producing a more effective coating of polymer on the carbon particles.

The modified carbon particles were well dispersed in an aqueous solution with cation-exchanged polymer by the hydrophilic groups generated on the carbon chain, resulting in the homogeneous coating of polymer on the surface of individual carbon particles.

The improved durability of the combined alkali and polymer modified jute appears to be due to the reduction of fibre mineralization by forming a protective coating of polymer on the fibre surface as demonstrated by elemental analysis, FTIR, XRD, NMR, SEM in conjugation with EDS.

The layer of polymer on the surface of the particles is clearly visible under the high-resolution electron microscopic image further indicating that the coating of polymer on GoldMag was successful (Fig. 2b).

A multilayer catalyst consisting of a electrophoretically deposited thin film of carbon nanotubes (CNTs) on a substrate of carbon fibers, followed by a coating of polymer-derived silicon carbonitride (SiCN), which is then decorated with a monolayer of transition metals is shown to perform at the upperbound of the phenomemological prediction from an earlier work [1].

The variation of power, pressure and O2/HMDSO ratio in an RF plasma was carried out to examine deposition rates and to optimize SiOx film properties for the coating of polymers.

The sequential coating of polymers and QDs showed a well-distributed surface on both Ag surfaces, respectively.

Examples for approaches in this field are the coating of polymers or metals with extracellular matrix extracts produced from sarcoma cells which are harvested and decellularized,[ 1] or the production of ECM on an artificial surface by cells which are removed prior to application.

An ultra-thin coat of polymer is laid between two arrays of electrodes at right angles to each other.