Sentence examples for coating loss from inspiring English sources

The results of SEM demonstrated that, after cyclic loading conditions in air, the bars coated by crystalline calcium orthophosphates showed a partial coating loss.

Crack Repair Hand tools similar to putty knives would be used to work a pre-ceramic polymer into small cracks and onto areas of coating loss on the reinforced carbon panels.

Particle size has the significant influence on the coating loss.

These calcium ions can be incorporated into the remaining HA coating, increasing its crystallinity and thus reducing the subsequent coating loss, which takes years to disappear [ 26].

Dual loss of CD44 and RHAMM did not further reduce coat loss from that observed in CD44−/− MEF.

This paper presents an investigation of coating adhesion loss in forming polymer-coated sheet metals.

The corrosion rate was calculated on the basis of coating mass loss with respect to time.

As the reflectivity decreases and additional phase shift influences by using the double layer AR coating, the loss of low-frequency mode gradually increased with the decrease of reflectivity due to the weakened interference effect and increased mirror loss.

Since the stir bar was fixed onto the portable device by magnetic force, it is very convenient to install, remove and replace the stir bar, and the coating friction loss which occurred frequently in conventional SBSE process could be avoided.

At higher concentrations (3.55 × 106 EID50 of H1N1 virus), virus infectivity was significantly abolished in PBS at day 10 postincubation relative to plasma and buffy coats; and loss of virus infectivity was slower in buffy coats relative to PBS but higher than in plasma.

Considering that the t-ZrO2 solid solutions begins unstable when the relation c/a exceeds 1.020, it is possible to evaluate the maximum niobia content that can be added to the coating without losses in its mechanical properties.