Sentence examples for coating hydrophobicity from inspiring English sources

However, adhesion surface characters of the coating decreased with an increase in coating hydrophobicity.

Meanwhile, using PMHS to partially substitute the hydrophilic groups in the coating, the hydrophobicity of the coatings was improved, and its static water contact angle was as high as 126°.

After stearic acid modification, the as-prepared Ni-Cu-SiC coating displays high hydrophobicity with contact angle of 156.0°.

Based on the above nano-scale structure with only PTFE nano-fibers, P1 coating surface exhibits hydrophobicity with a WCA of 136°. Figure 1 SEM micrographs of surface microstructures of the pure PTFE and PTFE/PPS coatings.

The principal consequences for the formation of improved hydrophobicity coats, applicable inter alia specialised protective coatings, were found to come not only from diisocyanate and polyol types but also from the alkylammonium cation structure which results from the use of different tertiary amines.

Surface analyses showed that this coating exhibits a high hydrophobicity due to its hierarchical structure and the use of hydrophobic polymer.

The hydrophobicity of coating deposited with PEG 2000 reached a climax exhibiting a contact angle of 123.8°.

Besides the hydrophobicity, the coating quality has the major influence on the release of urea.

There is less negative phase shift in the PbC18 coating due to increased hydrophobicity, as previously mentioned.The lead tetradecanoate is mostly resistive.

The surface of the mold was modified to render hydrophobicity by coating it with 1 H-perfluorooctyltrichlorosilanechlorosilane (Sigma-Aldrich).

The poly methyl hydrogen) siloxane (PMHS) was introduced to replace the hydroxyl (OH) groups and decrease the surface energy of the coating, it increased significantly the hydrophobicity.