Sentence examples for coating homogeneous from inspiring English sources

The addition of SiC particles resulted in denser coating, homogeneous distribution of reinforcement phase and modified coating surface roughness and interface morphology.

The present work aims to improve mechanical properties of glass plates by coating homogeneous Ce4+-doped titania films on them with the sol gel technique.

SEM analysis shows that among all coatings, the TNT/CS-PVP/HA coating possesses homogeneous surface and the incorporation of PVP into CS resulted in better morphology.

The coating is homogeneous, stable and retains its biocidal properties through at least 20 washing cycles.

The results show that the conversion coating was homogeneous with some small cracks.

The nanofibrous exterior of this composite bioactive coating facilitated homogeneous growth of flake-like carbonated hydroxyapatite layer within a short period of immersion.

It has been found that the cerium permanganate conversion coating is homogeneous as compared with the chromate coating.

The working electrodes were prepared by coating a homogeneous slurry containing 80 wt% active material, 10 wt% acetylene black (MTI, 99.5%), and 10 wt% polyvinylidene fluoride (PVDF) (Kynar, HSV900) binder dissolved in 1-methyl-2-pyrrolidinone (NMP, Sigma-Aldrich, 99.5%) onto a copper current collector by a doctor blade, and further drying at 65 °C for 12 h in a vacuum oven.

The enhancement of the PEC performance of ZnO because of the coating by homogeneous nanoscale ZFO crystallites herein was comparable with that reported in a previous study, in which ZFO nanoparticles with sizes of 5 8 nm were decorated on ZnO nanostructures through thermal decomposition of metal surfactant complexes [15].

The majority of the metal enhanced fluorescence studies in the literature are done by coating a homogeneous layer of fluorophore solutions directly onto metallic surfaces.

The solution is validated by comparing the numerical results with their counterparts reported in literature for the conventional system of thick plates coated by homogeneous layers, as well as the 3-D finite element analysis.