Sentence examples for coating homogeneity from inspiring English sources
After substrates coating, the infiltration ability, coating homogeneity and structural integrity (chipping and cracking) were evaluated for each coating layer.
In order to characterize the influence of both technologies on the coating homogeneity, the Debye sheath thickness sD at the substrate side was determined, which is expected to strongly correlate with the coating homogeneity on complex surfaces, since it is a measure for the shielding of charged coating atoms.
In order to obtain a sufficient coating homogeneity, pulsed high power plasma processes such as the high power pulsed magnetron sputtering (HPPMS) or the pulsed cathodic arc evaporation (PCAE) has to be chosen.
NiP-TiO2 sol-RGO coated steels show high homogeneity coating with ultra-thin water-repellent RGO layer fully covering on the outer surface leading to significant improved corrosion resistance and electrical conductivity of steel.
Simultaneous improvement of coating density and homogeneity is observed.
The scanning electron microscopy (SEM) images of this new coating showed the homogeneity and the porous surface structure of the film.
Cataphoresis is recognized to ensure high adhesion properties of the coating and good homogeneity, even for surfaces with a complex geometry.
By systematic variation of the LiFePO4 coating thickness and homogeneity and the foam substrate, it is revealed that LiFePO4 exhibits a uniform delithiation process and that the electrochemical reactions favor particles closer to the carbon structure, which is due to the poor electrical conductivity of LiFePO4.
This may imply determining the thickness of a foil or evaluating the homogeneity of coating applied to a pharmaceutical tablet.
A multi-walled carbon nanotube (MWCNT /hexamethylene diisocyanate (HDI) composite coating with excellent microstructural homogeneity was produced on copper substrate from aqueous suspensions using electrophoretic deposition (EPD).
The FTIR and XRD showed the crystallinity of the phases and the chemical composition homogeneity of the coating.
