Sentence examples for coating detachment from inspiring English sources

The critical load for coating detachment depends on coating thickness, as expected for PVD coatings, but is unexpectedly low for a medium-temperature CVD layer.

Substrate microstructure effects are evidenced by consideration of coating detachment as the critical damage mechanism.

This layer promotes steel transfer and associated adhesive wear of the coating, which rapidly results in coating detachment and eventually causes notch wear.

Then the coated samples were anodized in glycerol electrolyte containing NH4F (1 wt.%) + H2O (10 vol.%) at 50 V for 2 h, which resulted in coating detachment.

Dependent on the applied load, after a certain number of impacts, damages in the film interface region develop resulting in coating detachment.

In this work, a new materials design that aims to avoid this coating detachment scenario is proposed, based on composites of Ti6Al4V alloy reinforced with HA powder, with materials gradation from bulk to surface of the prosthesis, where the titanium bulk provides toughness and the outer regions provide biological performance.

A coat of ironic detachment is required for anyone who hopes to withstand the brutal feedback of the marketplace.

Corrosion tests in 0.1 M H2SO4 solution at 80 °C revealed major improvements in the corrosion resistance of titanium foil following either DPE or PID treatments, as indicated by weight change and open-circuit potential, although the surfaces treated by PID can undergo some detachment of coating material in the acid solution.

Open image in new window Fig. 11 a LM bar: partial delamination of sand coating, b HM bar: detachment of entire sand coating, c bar pullout from the left hand part showing outward movement and d bar pullout showing inward movement of the bar.

With the addition of exogenous reducing agent, both the in vitro and in vivo cellular uptake was markedly increased, demonstrating that the reduction-sensitive PEG coating achieved a controllable detachment from the surface of liposomes and did not affect the penetrating abilities of CPPs.

Low current and current transient induce diffused cracking and detachments of coating fragments which decrease corrosion resistance as shown by potentiodynamic polarization tests.