Sentence examples for coating coating from inspiring English sources

Two-layer samples that had an EB-PVD coating deposited on bond coated nickel-base superalloy IN625 substrates, free-standing APS and EB-PVD coatings as well as a quasi-free-standing EB-PVD PYSZ coating (coating on semitransparent sapphire) were included in the study.

The results show that the composite coating consists of two parts, one is a TiN substrate coating (coating I) and the other is Zr-base amorphous-nanocrystalline surface coating (coating II).

The plasma spraying experiments in this study, involving different process parameters of HA coating (coating thickness up to approximately 120 μm), are divided into four stages.

In particular, four different reinforcement methods with mortar coating (bare mortar coating, coating with steel mesh, coating with polymer reinforcement, and coating with GFRP mesh reinforcement), three different mesh-only reinforcement (steel mesh, polymer mesh with larger grids, and polymer mesh with smaller grids), and 2 different arrangements of PP-bands (4 × 4 and 6 × 6) were tested.

The corrosion resistance properties of the polyphosphate coating in the humidity cycle were found to be much superior than that of rust preventive oil (RPO) coating with surface oil content of 250 mg/m2 and conventional phosphate coating (coating weight: 2.0 g/m2.0

Table 1 Effect of coating on paper properties Types of coating Coating weight (g/m2) Brightness Gloss Smoothness (s) Picking velocity (cm/s) Base paper 0 97.80 3.5 1.7 137 Cooked starch 2.52 96.98 2.8 1.9 182 ZnO nanoparticle mixture with cooked starch 2.38 96.73 2.5 1.9 218 ZnO-starch nanocomposite 2.13 96.90 2.1 2.1 254.

To make sure you build a good nonstick coating, coat the skillet with oil, bake it, allow it to cool, and repeat the process again.

According to the transmission behavior and loss mechanism of electromagnetic waves, uniform yolk-shell C@C microspheres are innovatively fabricated through a "coating-coating-etching" route as a novel microwave absorber.

Other names for this condition include wooly coat, coat funk, pseudo-Cushing's disease, or severe hair loss syndrome.

However, the property of a coated cathode was highly dependent upon the coating material, coating thickness, and coating shape [12 15].

Tribological processes occurring in the coating coating contact zone are dominated by graphitization and oxidation of W-C H coating.