Sentence examples for coating bulk from inspiring English sources

It has been demonstrated that silicon and titanium are rather homogeneously distributed within the SiO2 + TiO2 coating bulk.

In the galvanostatic process mode, the titanium/silicon ratio in the coating bulk can be controlled by the current density value.

Complementary, in-depth chemical analysis of the surface oxide regions of the coatings by means of X-ray photoelectron spectroscopy (XPS) was performed and revealed that the surface oxide composition is primarily determined by the oxygen concentration in the coating bulk.

The procedure requires residual stress and hardness measurements in the surface layers of material of a coated component (coating and bulk) to develop numerical axisymmetric and three-dimensional finite element models capable of predicting the fatigue life.

In addition, the results are compared to detonation-sprayed alumina (Al2O3) coating and bulk Al2O3.

We demonstrate, for the first time, that a thin, strong, ductile, and adhesive coating renders bulk metallic glasses (BMGs) bendable.

The material can be applied as coating or bulk by standard technologies and shows good adhesion to various substrate materials.

The effects on the fatigue strength of coating and bulk material defects like droplets and non-metallic inclusions were considered along with the residual stress gradient characterising the coating and evaluated by means of X-ray measurements.

The signals at the interface between coating and bulk glass results in an anomalous signal due to the change of chemical and physical properties between the two layers, as already discussed [34, 48].

They need coats with bulk and substance top to bottom".

Cashmere and denim jeans were turned up and showed off cream woollen socks and heavy boots with white technical soles; chunky coats added bulk at the top.