Sentence examples for coating breakdown from inspiring English sources

Some new insights into organic coating breakdown have been obtained by examining coated steel samples after various periods of exposure to 3% NaCl solution, using a novel combination of two powerful techniques.

The roles of the pre-existing channel defects exposing the substrate surface and of the spurious interfacial oxide promoting coating breakdown and/or delamination are emphasized.

Geometric location of the coating breakdown site relative to the ground surface and the CP anode has a particular influence on oxygen concentration profiles and pipeline corrosion.

However, the oxide cap, initially formed by the oxide coating breakdown at ignition, is progressively removed in wet CO2, whereas it is unvarying in dry CO2.

The coating breakdown happens at a critical concentration of vacancies generated by dezincification in the ultra-thin parts of the coating.

Dissolution of zirconium is faster in the silicate electrolyte in the early stage of PEO, but is faster in the aluminate electrolyte following coating breakdown.

Severe formation of porosity at the interface causes a degradation of the bonding strength between substrate and coating, with functional breakdown of the coating system as worst result.

The resulting breakdown of coating integrity in the irradiated coating leads to both anodic and cathodic activity occurring through the photodegraded coating and a subsequent loss in overall SVET current balance in the plane of scan above the cut edge.

This coating slows down the breakdown and absorption rate of glucose.

While all thicknesses of MSZ coating provides very good protection, breakdown potential increases considerably for the 150-μm-thick coating.

The lower pH of the post ruminal (abomasum and ileum) activates the breakdown of the coating and consenting release of amino acids for absorption.