Sentence examples for coating achieving from inspiring English sources
Scratch tests indicated a well adhered coating achieving a critical load of 80 N.
The lower proportion of blocked pipettes at lower concentration is due to incomplete coverage achieved in the dip-coating process, with this principle extended to more substantial GNF coating achieved at higher solution concentrations.
Only fibroin with collagen coating achieved cell confluency.
This coating achieved a solar absorptance of 0.82-0.59 in the wavelength range of 0.3-0.7 0.3-0.7le in the wavelength of 0.3-2.5 μm the solar absorptance only reached 0.61-0.35.
The prepared hierarchical silica microparticles/epoxy coating achieved a very high water contact angle up to 161° and a sliding angle as low as 5°.
This coating achieved a reduction of 86% in the friction coefficient of the uncoated glass without significantly impairing its wear resistance.
With the addition of exogenous reducing agent, both the in vitro and in vivo cellular uptake was markedly increased, demonstrating that the reduction-sensitive PEG coating achieved a controllable detachment from the surface of liposomes and did not affect the penetrating abilities of CPPs.
Thanks to its relatively low optical density and a moderately high refractive index (RI = 1.65510, for pure boehmite), which can readily be reduced by controlling particle size and packing density11, boehmite coating allows achieving high difference in refractive indices in the interference structure needed for the high visibility of the interference color prints.
This process allows for facile shaping of the superconductor precursor, before reaction, along with the application of the insulating coating, the sintering of this coating being achieved by the thermal treatment required for the synthesis of Nb3Sn.
Therefore, perovskite conversion in spin-spin coating is achieved easier than that in spin-dip coating, due to the positive effect of the centrifugal forces that improve mixing of the precursors and therefore lead to better chemical conversion.
Bioplastic seed coating was achieved using procedures and equipment designed for commercial polymer film-coating of tablets.
