Sentence examples for coated mirror from inspiring English sources

A laterally graded multilayer coated mirror is installed in a chamber at the intersection of the source output and the beamline.

The TEX instrument is a type of normal-incidence telescope using a Mo/Si multilayer coated mirror and a split thin metal filter, which was technologically identical to the past space-borne instruments (Yoshikawa et al., 1997, 2001b).

The axial resolution was determined by measuring the full width at half-maximum (FWHM) of the signal reflected from the surface of a chrome coated mirror through a scattering-free deionized-water film between the mirror and the SIL to simulate the optical thickness of the tissue.

The method uses gratings developed at MIT and multilayer coated mirrors.

More recently, we have entered Phase III, where we are using laterally graded multilayer coated mirrors (LGMLs).

Evans, M. et al. Thermo-optic noise in coated mirrors for high-precision optical measurements.

Using a near-concentric configuration, it will provide high average power (∼10 kW) output using one of three sets of dielectrically coated mirrors.

From doing experiments and simulations on the ground it became known that protons of a few hundred keV could bounce off of the Ir coated mirrors and make it to the focal plane, much as the x-rays do.

Beam steering and focusing were accomplished by gold coated mirrors (PF10-03-M01, Thorlabs, NJwton, NJ) and a 150 mm focal length CaF2 lens (Infrared Optical Products, Farmingdale, NY), respectively.

Harmonic rejection of the monochromated radiation was achieved using two Pt coated mirrors at an incidence angle of 7 mrad.

The IR radiation is directed upward in a novel configuration as shown in Fig. 1 using gold coated mirrors and a lens to direct and focus the laser light.