Sentence examples for coated condition from inspiring English sources

In mixed silica zirconia coatings, crystalline zircon (ZrSiO4) was formed neither in the as coated condition nor after annealing.

The sputtered films in the "as coated" condition (after EB-PVD deposition) showed strong diffusion effects of different elements from the superalloys.

The low-cycle fatigue (LCF) behavior of the directionally solidified nickel-base superalloy DZ125 was studied in the uncoated state and in the Electron Beam Physical Vapor Deposition (EB-PVD) coated condition at 850 °C and 980 °C.

The out-of-phase thermo-mechanical fatigue (TMF) behaviour of the single crystal superalloy CMSX-4 was studied in the uncoated and in the low-pressure plasma sprayed (LPPS) coated condition.

Still, the coated conditions did not attain the fatigue strength of the uncoated non ECAP-processed aluminum substrate.

The coated specimens in the as-deposited condition showed a reduction of approximately 88%, whereas in the notched uncoated and coated conditions it was of approximately 94 95%.

The electrochemical testing on the electrodeposited films showed that the polarization resistance was greatly increased, from an initial value for the Al 6061-T6 of 126 up to 17,300 Ω cm2 for the coated conditions, which implies a reduction of the corrosion wear about 99.29%.

TZP-A and ATZ rods were tested in native, sandblasted, and coated conditions.

Through-thickness cracks that are present in both Al3Ti and Pt-aluminide coatings in as-coated condition act as easy paths for oxygen to reach the substrate which results in considerable localized damage.

The microstructural differences between the two coatings in the as-coated condition were investigated and the development of their microstructure during heat treatment was described.

A mixed layer of alumina and zirconia exists in the as-coated condition.