Sentence examples for coated blade from inspiring English sources
Results of sharpness test reveal that both BMG blade and the MGTF coated blade exhibits much lower surface roughness at their tip-edge and smaller BSI values (0.25 and 0.23, respectively) than the commercial blade (∼0.34), which corresponds to 26.5% and 32% improvement on the sharpness, respectively.
To capture the meteorites' shiny centers, Barton broke the space debris with a rock saw and a diamond coated blade, grinding them until light could freely flow through the remains.
The modulus increased with thermal exposure of the coated blades up to 85 cycles, but decreased for a larger number of cycles.
If concrete has cracked, and the surfaces on both sides of the crack have remained at the same level, the best way to prepare the crack for filling is to use a circular saw with a special diamond-coated blade to widen the crack and make the inner edges of the crack uniform.
The PTFE-coated blade resulted in a 22% lower average force and a 26% lower maximum force than the chromium-coated blades and 10% lower average force and 11% lower maximum force compared to lacquered blades.
The user pushes the tile across the table's surface, where it is cut with a diamond-coated blade.
At the rear of the hall huge rotor shafts with gleaming stainless steel wheel disks sprouting jagged necklaces of ceramic-coated blades hang suspended in the air.
The Al2O3-coated blades, however, did not show superiority over the uncoated reference blades.
The lifetime of the CrN/CrCN-coated blades made of high speed steel and cemented carbide materials is increased by about 33%and7%7% respectively compared to that of CrN-coated blades, and by 170% and 110% compared to that of uncoated blades.
The wear rates of the WC/Co-coated blades were significantly lower than those of the uncoated blades, indicating a great improvement in the wear protection provided by the coatings.
We employed ceramic-coated blades to produce 10 μm sections that were mounted on electrostatic slides.
