Sentence examples for coat rod from inspiring English sources

The 'rows' in the inner coat are aligned to the left-handed rods of the outer coat, with four inner coat heterotrimers spanning one outer coat rod.

The inner coat 'columns' are aligned to the right-handed outer coat rods, with two inner coat heterotrimers spanning one outer coat rod.

Outer coat rods bind to the inner coat patches in a preferred orientation.

The temperature changes of special points on the coating rod were measured using a thermocouple.

The events that the matrix and carbides experience as the coating material pass from the coating rod to the substrate, in forming the coating, is described.

A coating rod of 1Cr18Ni9Ti (321) was deposited on the substrate of mild steel 1020 to be able to perform a friction surfacing experiment.

Likewise, this study reveals that the material at the top of the coating rod is plastic, and that it behaves as a quasi-liquid in the friction surfacing process.

Then the rate decreased to a low level once the friction system became quasi-steady and the temperature became approximately stable near the melting point of the coating rod.

The discharge capacity of as-synthesized rod like Li2FeSiO4 with 30 wt% conductive carbon coating exhibited 177 mAh g−1 for the first cycle, which is more than that of as-synthesized and 20 wt% conductive carbon coated rod like Li2FeSiO4 particles.

Bar coater 08, coating rods are used primarily to apply a variety of coatings or emulsions to a multitude of substrates.

A new sealing material has been shown to provide improved seal performance when used in cylinders using tungsten carbide coated rods.