Your English writing platform
Discover LudwigSuggestions(1)
Exact(2)
Leave about 3 inches (7.6 cm) of cable poking out from the brake clamp.
Pull out about 18" (46 cm) of cable from the stub pipe.
Similar(58)
Remove 8 inches (20.3 cm) of the cable jacket from both ends and pass the cable into each of the boxes through the opening until 1/2 to not more than 1 inch (2.5 cm) of the jacket is visible inside.
Pull out 6 to 10 inches (15 to 25 cm) of snake cable.
Route the conductors through the cable clamp until 1 inch (2.5 cm) of the jacketed cable extends through the cable clamp.
Remove 3/4 inches (2 cm) of the audio cable's outer jacket.
Extend 6 inches (15.2 cm) of your new cable into the box, and connect the other end to a breaker in your panel box, or an existing circuit above the ceiling.
For both probes, the variable-height pulses produced by the charge amplifiers were transmitted to the power- and pulse-processing module through 350 cm of shielded, multi-conductor cable.
Strip 8 inches (20.3 cm) of jacket from the cable(s) and install into the connector.
You can also go to your local electronics store and buy a 1⁄8 inch (0.3 cm) connector cable, instead of building your own.
Depth of the probe and orientation of the light source were controlled by a plate attached to the cable within 5 cm of the light sensor.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com