Your English writing platform
Discover LudwigExact(55)
All mice were tested in the transparent Plexiglas cylinder (height 30 cm × diameter 10 cm) for a total of 5 min duration.
For a surface temperature measurement it would be larger (∼4 cm for a surface temperature error less than 5%).
It has already shown better spatial uniformity than 1% and much improved etch rate within a diameter of 10 cm for a photo-resist etch process.
The accuracy evaluation shows that the method is suitable for CAAD modeling applications regarding demolished buildings and monuments of the early 20th century years (2% relative accuracy, i.e. 40 cm for a 20 m façade, included the metric data inaccuracy).
The 15-mm-long Nd YVO4 slab has thin-film-coated lateral sides that enable a zig-zag gain length longer than 5.5 cm for a single pass through the slab, which is the longest reported to date.
where CA is the specific areal capacitance (F cm−2) calculated from the charge-discharge curves; d is the thickness of the active material, with a value of ~3 × 10−4 cm for a single MSC in this work; ΔV is the applied voltage (V); and Δt is the discharge time (s).
Similar(5)
This led to determine experimentally the optimal vapour-solution interface area inside the adiabatic absorber and found to be equal to 140 cm² for a 45 W cooling system.
The multilayer film yielded a minimum resistance of 1.0 × 104 Ω/sq (2.8 S/cm) for a film with approximately 50 bilayers.
The MWCNT/C/PS composites have an electric conductivity higher than 0.01 S/cm for a filler loading of 1 wt.%.
Waveguiding in the visible and in the near infrared was demonstrated, with propagation losses of about 3 5 dB/cm for a light with a wavelength of 632.8 nm.
(c) The stress dependence of steady-state tensile actuation and contractile work (black and blue data points, respectively) produced by Joule heating (0.19 V/cm) for a 150-mm-diameter, coiled yarn having different levels of inserted twist [2].
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com