Your English writing platform
Discover LudwigSuggestions(1)
Exact(19)
LLDs were reduced from 1.66 to 1.24 cm, at an average of 11.4 years postoperatively.
A relic joint was identified at a depth of 78 cm at an attitude almost parallel to the slope surface.
The n-type ZnO Al films had a low resistivity of 1.08×10 3 Ω cm at an optimal Al content of 4 at%.
The distribution and effect of krotovinas on soil organic carbon (SOC) stocks were studied in a deep profile (450 cm) at an archaeological site of the Palaeolithic period at Shenyang Agricultural University of China.
Moreover, the maximum critical depth (56 cm) is less than the diameter of the hot leg (78.74 cm) at an injected coolant mass flow of 400 kg/s, and with diameter of 4 in (10.16 cm) as the design diameter of the injection pipe in US-APWR Mitsubishi Reactor; such result assure that there is no flow blockage in the hot leg yet.
The resulting a-Si coated grp/boehmite/polybutylene terephthalate polyester resin composite exhibited a high volume resistivity, exceeding 1.0 × 1014 Ω cm at an applied voltage of 500 V, and a thermal conductivity of 3.3 W/m K at 22.9 vol.% a-Si coated grp loading.
Similar(41)
Suzuko didn't have quite the knack, only rolling the bamboo about 10 cm at a time.
Deliver compressions to the centre of the chest, at a depth of 5-6 cm, at a rate of 100 120 per minute.
Two systems with line length of 5 cm and 10 cm at a large working distance of 110 mm have been realized.
As oxygen gas flowed at 2 sccm, the electrical resistivity was decreased to 3.9 × 10−4 Ω cm at a 50% RF portion of the total power.
It was found that tritium self-sufficiency can be achieved with a breeder zone thickness reduced to no more than 55 cm at a 6Li enrichment of 90%.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com