Sentence examples for clearance length from inspiring English sources

Moreover, extensive parametric investigations are performed in order to achieve an optimum performance of the isolator with respect to three main properties which define the device: clearance length, the inclination angle and the friction coefficient.

In the optimum design of journal bearings, the design variables such as radial clearance, length to diameter ratio, groove geometry, oil viscosity and supply pressure are used to simultaneously minimize oil flow and power loss.

The same authors made the final selection; we restricted the selection to articles that reported on relevant study end points, including pulmonary compliance, arterial oxygenation, sputum clearance, duration of mechanical ventilation, length of stay in the intensive care unit, and incidence of pneumonia, and only if the main objective concerned the evaluation of the MH procedure.

Finally, a method is provided for determining the appropriate radial clearance and length of misaligned water-lubricated rigid plain journal bearings.

Depth of snow, and hence date of snow clearance and length of the summer period, is intuitively important in determining species occurrence.

The relationships between the ultimate load carrying capacity and the misalignment angle for bearings with different relative clearances, different length-to-diameter ratios are gained.

In addition, the effects of clearance and bolt length on the joint stiffness in each stage are presented.

Effects of minimal clearance, pressure difference, length and geometry of the leakage channel on internal leakage losses are analyzed.

Based on the probability theory and the Gaussian elimination method, the quantitative relationship is explored among phase clearance reliability, cycle length and green time.

The effects of the spring force constant, compressor discharging volume, fit clearance and piston length on the dynamic performance of the switch valve are analyzed.

The effects of the squeeze force, the clearance, the rivet length and the clamping angle in the stress field of the joints are considered by means of numerical models.