The detectors were then rinsed with distilled water and cleaned with alcohol.
Ice was chipped with a forged, hardened steel geological hammer, cleaned with alcohol.
First, the skin surface of the underside of the jaw was cleaned with alcohol and electrode paste (Elefix; Nihon Kohden Corp).
As the flexible substrate for supporting the device, a Kapton board was cleaned with alcohol and DI water for several times and dried at 60 °C.
The brackets and wires were cleaned with alcohol wipes before the module or ligatures were tied to form a test unit.
The PTFE films were cleaned with alcohol, isopropyl alcohol, and deionized water successively and then dried in an oven at 50 °C.
New Zealand White rabbits weighing 2 3 kg were anesthetized, their left tibias shaved and cleaned with alcohol, and the bone exposed by a small incision.
To ensure aseptic techniques, fur over the surgical site was removed using electric clippers, the area cleaned with alcohol followed by betadine prior to incision.
To avoid contamination, all the brackets and wires were cleaned with alcohol swabs before use, and utmost care was exercised during the handling of the same.
The substrate was R217102 glass in a size of 1 cm × 1 cm × 0.1 cm; prior to pumping, the substrate (R217102 glass) was cleaned with alcohol in an ultrasonic bath and blow-dried with dry nitrogen gas.
The skin was shaved, cleaned with alcohol, and abraded to reduce the electrode impedance.
