Sentence examples similar to clean sensor from inspiring English sources
Silanization of the cleaned sensor chips was performed in the following way: toluene solution immersion with agitation for 30 s, followed by immersion of toluene with 4% trichloro methyl)silane solution for 1 h.
The cleaned sensors were then dipped in 5 mM 3-mercaptopropionic acid (3-MPA) overnight.
The sensors were prepared as follows: QCM-D sensors were cleaned using a UV/ozone cleaner for 10 min. The sensors were then dipped in a mixture of 10 mL of pure water, 2 mL of ammonium hydroxide, and 2 mL of hydrogen peroxide at 75 °C for 5 min. Then the sensors were rinsed with pure water and sonicated for 2 min. Later, cleaned sensors were dried using a gentle stream of nitrogen.
Each time the shutter clicks and the mirror pops up and down, air blows to clean the sensor.
Among other things, there is an image stabiliser, to correct for hand-shake; a low-pass filter, to eliminate moiré fringes caused by repetitive pattens in fabrics and the like; and a dust-reduction mechanism, to clean the sensor after a lens has been changed.
Among other things, there is an image stabiliser, to correct for handshake; a low-pass filter, to eliminate interference caused by repetitive patterns in fabrics and the like; and a mechanism to clean the sensor of dust after a lens has been changed.Lodged in there as well is a sophisticated phase-detection system for focusing the lens automatically.
Be aware that none of the camera manufacturers recommend that you clean your sensor yourself.
You may need to clean the sensor or lens, or go back and edit each image afterwards.
There are descriptions on the internet on how you can clean a sensor using just scotch tape.
