Sentence examples for clean fe from inspiring English sources
With Mo segregated to a clean Fe Σ3(111) grain boundary, the embrittling potency of P increases from +0.19 to +0.88 eV, suggesting a strong detrimental ternary effect in P Mo couple.
For comparison, the spectrum for clean Fe is also reproduced from [20] in Figure 5b.
In short, the film was found to be clean, stoichiometric in Fe and Mn (i.e., 1 1 ratio from energy dispersive X-ray spectroscopy in TEM within the error of 2 5%), highly epitaxial and coherently strained throughout the thickness.
Experiments were conducted using each of three types of column packing material using minerals common to subsurface environments: clean quartz sand; ferric oxide (Fe(OH 3 -coated sand; hausmannite (Mn3OH 3 -coatedand.
Evolution of FE with soot load is reported from clean filter FE to maximum efficiency (100%), as the deposited soot in the filter wall itself acts as the filtering medium.
Thin films of Fe ∼10 nm were deposited on chemically cleaned Si wafers by thermal evaporation technique at a base pressure of 2.0 × 10−6 Torr and no buffer layer was used between Fe film and Si substrates.
The mixture was filtered using an acid-cleaned 0.45 μm Millipore filter and the concentration of Fe(II) and Mn II) in the filtrate was determined by atomic absorption spectrometry (Model AA6800, Shimadzu, Japan).
Seirawan could not play 44... Qe5? because 45 Qe5 Re5 46 Rh6! e3 47 fe fe 48 Kf1 Re4 49 Rc6 produces a winning endgame for White.
According to the FE-SEM images of Fig. 1a, it can be seen the surface of AAO membrane was still kept clean after pure Indium (In) nanowires were sulfurized at 500 °C for 10 h. Figure 1b shows a typical FE-SEM image for the cross-section image of β-In2S3nanowires.
