Four sterilization methods were used to assess the affect of sterilization on diffusion of oxygen through the membrane: 1) Autoclave at 121°C for 15 min, 2) Soak in Dri-Clean detergent at 52°C for 15 min, 3) Soak in 70% ethanol for 15 min, 4) Exposure to culture hood ultraviolet sterilization light at 253.7 nm for 2 h.
It is far more durable, dries harder, and can be cleaned with light detergent without damaging the sheen.
The sink was first cleaned by a detergent (Deterg'anios®, Anios, Lille, France), rinsed with clear water and then cleaned and disinfected with Aniosurf®.
In one room, huge casseroles filled with fully decomposed remains from the nearby woods are being boiled clean in detergent.
From 1 November 2009, an initial clean using detergent was performed, followed by the application of HP, herein referred to as the 'disinfectant arm'.
The glass substrate was first cleaned with detergent then ultrasonicated in acetone and isopropyl alcohol for further cleaning and subsequently dried in a vacuum oven at 80°C for 3 h.
The ITO-coated glass substrate was first cleaned with detergent, then ultrasonicated in acetone and isopropyl alcohol for further cleaning, and subsequently dried in a vacuum oven at 80°C for 3 h.
It's collected, cleaned with detergent, shredded and reprocessed into new multicolored products.
FTO glass plates with high transparency in the visible range were etched with a laser to form two detached electrode pattern before being ultrasonically cleaned with detergent, deionized water and ethanol successively.
