Sentence examples for clean deposition from inspiring English sources

This technique is suitable for depositing high quality films with complex compositions because of its influencing properties such as harmonious transfer of species from the target to substrate, enrichment in crystallinity, clean deposition, and simplicity and flexibility in the engineering design.

These OP data were calculated within eight 2 × 2 mm regions of interest each within both the clean and deposition areas of each of the five heads.

Certainly, based on a review of the public record, the S.E.C.'s own investigation of its handling of Madoff over the years and interviews with experts in financial regulation, it is highly unlikely the commission ever proclaimed Madoff "perfect," or, as Wilpon suggested in his deposition, "clean as a whistle".

Detergent and dispersant additives are used primarily in internal combustion engines to keep metal surfaces clean by preventing deposition of oxidation products.

Before deposition, clean HOPG (0001) samples were prepared by cleaving in air and immediately transferring substrate into the VT-STM UHV chamber through a load lock.

Clean chemical vapor deposition (CVD -grown graphene surfaCVD -grownntrinsic electrical properties were obtained by a modified poly(methylmethacrylate) (PMMA) transfer method.

Scaling and fouling of membranes are an on-going performance issue for most plants This presentation outlines innovations in speciality chemicals designed to inhibit membrane scaling and fouling and to clean membranes where deposition has occurred.

An Ag film with a thickness of 30 nm was coated onto (100) Si substrates with the resistivity of 1 to 10 Ω·cm, which were cleaned by electroless deposition in an aqueous solution[9].

The target surface was cleaned prior to deposition by presputtering for 10 minutes at 30 W.

In the deposit treatments meiofauna assemblages were exposed to the deposition of clean and contaminated sediments simulating the disposal of TBT-contaminated dredged material at sea.

This validates established technique in the industry called stimulation whereby heat injected into the reservoir clean pore spaces of deposition.