Sentence examples for clamping area from inspiring English sources

The studied factors included adherend thickness, adhesive modulus, adhesive thickness, clamping area and bolt-hole clearance.

Some critical features of mold parts like clamping area, location, and gate dimensions are calculated on mold shot.

The influence on delamination of thrust force, clamping area at the bottom surface of the laminate and the stacking sequence is studied using the simplified model.

In order to control the fracture position, a radial groove is cut out which allows to keep the fracture away from the clamping area.

The second defect peak (peak C2) can be attributed to the remaining substrate and coating defects such as embedded grit particles, coating porosity, surface roughness and sliding in the sample clamping area.

Forces applied on the cantilever are sensed by piezoresistive gauges in the clamping area and the resulting output voltage is measured by a Wheatstone bridge.

After completion of the cut-out process based on mold shot, air venting for packages and runners, clamping areas, shutoff areas, side-rail areas, relief areas, locating pins holes and their relief, misalignment pins holes and their relief are created by the rules and thumbs and mathematical formulae incorporated into the program.

The non-uniform deformation near the clamped area contributed to the discrepancy between the stress-stretch curves.

The differences between the two models that are pronounced near the clamped area can be explained by particular boundary conditions of the numerical model.

It was intuitively inferred that leakage of etchant from the clamped area can be a feasible cause to have the upward pores grow in the notches of the unpolished surface.

Both models agree considerably well, presenting less than 5% deviation on the whole structure, except near the clamped area, where differences can be explained by particular boundary conditions of the numerical model.