Sentence examples for cladding diameter from inspiring English sources
We develop a space-efficient single-mode fiber (SMF) having a cladding diameter of only 82 μm.
Multimode fiber (MMF) with a core and cladding diameter of 62.5 μm and 125 μm respectively was used in this research [17, 18].
To create tapered fibers, we begin with a Corning SMF-28e optical fiber that has a silica core and cladding diameter of 8.2 μm and 125 μm, respectively, all of which is protected by an acrylate coating which extends out to a diameter of 245 μm.
12-Core 5-LP mode homogeneous multicore fibers have been proposed for analysis of inter-core crosstalk and dispersion, with four different lattice structures (circular, 2-ring, square lattice, and triangular lattice) having cladding diameter of 200 µm and a fixed cladding thickness of 35 µm.
The results are: fission gas release is several tens of percent, rod internal pressure does not exceed the coolant pressure, and the highest fuel center temperature is 2400 K, while cladding diameter increase caused by pellet swelling is within 1% strain.
A standard multi-mode fibre with core and cladding, diameter of 60.2 μm and 124 μm respectively, was used to fabricate the tapered fiber optic sensor.
The final stage comprises of a 2 m-long Yb-doped fiber with 20 μm core, 125 μm cladding diameters and numerical aperture of 0.08.
The challenges of realizing a DCFC with core/inner cladding diameters ratios compatible with confocal microscopy are however much greater as the appropriate diameter ratio required for optical sectioning is very small and results in losses at the fused junction.
As the core and cladding diameters are the same in both probes, the effect of the centre centre distance on double-fibre designs can be investigated.
The air holes in the cladding, whose diameter in outer ring is always larger than the next inner ring, is used to reduce the confinement loss.
The MM inner cladding collection diameter, however, decreases as TR increases following an inversely proportional law.
